• CWB - CSA W47.1 (melting steel) Division 2
• RBQ  Metal Structure and prefabricated concrete elements & Special equipment and products

Our crane girders are welded using our submerged arc welding robots.

• Commercial
• Industrial construction
• Defense
• Energy
• Industrial
• Manufacturing
• Mining
• Metallurgical
• Pulp and paper

• Soft steel

PONT ROULANT PROTECH offers you a wide range of quality lifting products, standard and customized, for all your needs:

• overhead cranes
• monorails
• jib cranes
• hoists
• lifting beams - spreaders
• gantries
• custom structures 
• ergonomic workstations
• accessories

Description of PROTECH products below.

Click on the pictures to access all the products.

OVERHEAD CRANES

Single Girder Crane

The single girder is the most common crane, it is generally used for light applications normally up to 10 tons.

• In some special cases the capacity could go up to 20 tons
• Maximum span of 100 ft.
• Hoist hanging from bridge beam

 

Double Girder Crane

The double girder structure is used for heavier applications up to 125 tons and can reach more than 100 ft. span. It can also be used to gain in lifting height because the hoist of the double girder crane is top running and the hook is fitted between girders.

 

Box Girder Crane

The box beams are made for large capacities and large spans when the W type beams are no longer sufficient.

 

Top or Under Running Crane

Suspended (Under Running) – The rails of a suspended overhead crane are installed on the ceiling of the building so do not require columns, leaving the floor free of obstacles. On the other hand, for the same reason, this type of bridge is limited in capacity.

Top Running – The deck is placed on the rails and allows to reach a greater capacity than the suspended type because the rails are installed on the columns of the building or the self-supporting structure.

 

Manuel or Motorized Crane

Small Workstations are generally hand moving (manual), however, in order to provide better control, it is recommended to install the “Motorized” workstation when loads exceed 2 tons.

 

Custom Fabrication Crane

We manufacture your crane according to your dimensions. needs and specifications.

• Service platform with crane lights
• Explosive Environment (anti-spark materials such as copper, explosion proof cabinet)
• Dusty environment (rail sweep, insulated motors, NEMA panel and components)
• Outdoor use (special painting, galvanizing, anti-corrosion materials, heated panel)

 

Motorized Gantry Bridge

When the installation of a structure is difficult or impossible, the crane on legs will be considered, usually for external use.

MONORAILS

Straight or Curved monorail

The monorails are custom made to reach specific and pre-established zones, either in linear and / or sinuous displacement (with adapted curves). Capacities can typically reach up to 5 tons.

 

Suspended or Freestanding monorail

Monorails can be suspended and / or freestanding.

 

Exchanger monorail

This type of configuration allows the branching of several monorail rolling tracks in order to reach several specific zones or several points of arrival. The exchanger is operated manually or mechanically, this is generally used for assembly lines or for warehouses.

 

Telescopic monorail

 

Lifting device designed for specific applications to reach cantilever point, generally used to go through a door.

 

Lifeline

Specialized device enabling workers to access critical areas without falling risk while being properly attached to a lifeline.

 

JIB CRANES

 Wall-Mounted Jib

Directly installed on a building column, the tie-rod model is the most economical.

• Maximum reach 30 ft.
• Capacity up to 5 tons
• We offer the engineering service of your column to validate its ability to receive a jib

 

Wall-Mounted Jib 

Directly installed on a column of your building, the model with raised boom allows to use the full available lifting height of the building.

• Maximum reach 30 ft.
• Capacity up to 5 tons
• We offer the engineering service of your column to validate its ability to receive a jib

 

Freestanding Jib

This self-standing jib directly anchors to the concrete slab or foundation, the freestanding jib is an economical solution of lifting and versatile.

• Maximum height of 20 ft.
• Maximum reach 30 ft.
• Capacity up to 5 tons
• Rotation 180, 270, 360 degrees
• We offer design / engineering service of your concrete slab or foundation

 

HOISTS

Manual Chain Hoist

• Manual hand geared
• Capacity from 1/8 ton to 20 tons
• Lifting height up to 100 ft.

 

Motorized Chain Hoist

• Capacity from 1/8 ton to 5 tons (up to 20 tons for some applications)
• Choice of 1 or 2 lifting speeds
• Possibility of a manual or motorized trolley
• Available on different voltages (120V / 220V / 1PH – 230V / 460V / 575V / 3PH)
• Lifting height up to 100 ft.

 

Motorized Cabled Hoist

• Capacity from 1/2 ton to 125 tons
• 2 lifting speeds
• Motorized trolley 2 speeds or variable speeds
• Available on different voltages (230V / 360V / 575V / 3PH)
• Lifting height up to 100 ft.

 

Pneumatic Hoist

The pneumatic hoist is appreciated for its variable control

• Capacity from 1/8 ton to 5 tons
• Pendant or cord controled
• Anti-spark option available
• Washdown option available

 

Food Grade Hoist

Used in a food environment

• Food grade reducer oil
• Epoxy paint
• Anti-corrosion components (stainless steel)

 

Foundry Hoist

Dual-brake hoist for lifting hot metal

• Available in chain or cable hoist

 

Electric or manual winches

• For horizontal or pulley use
• Capacity from 250 pounds to 50 tons
• Custon made product

We are offering Thern, Columbia and Jeamar brands

 

LIFTING BEAMS

X-Lifting Beam for Super Bag

 

Roll Lifting Beam

 

Beam with adjustable hooks

 

Vacuum Lifter

 

Magnets Lifter

 

Metal Sheet Lifting Beam

 

Lead Rotation Equipment (Posi-Turner)

See the Posi-Turner in action:

GANTRIES

Fixed Gantry

• Capacity up to 10 tons
• On legs or on wheels

 

Adjustable Gantry

• Capacity up to 5 tons
• Adjustable height
• On legs or on wheels

 

Aluminium Gantry

• Capacity up to 5 tons
• Fixed or adjustable height
• On legs or on wheels
• Very light for transport

CUSTOM STRUCTURES

Freestanding or Semi-freestanding Structure

• Self-supporting – Completely independent of the building
• Semi-freestanding – Braced to the building
• Interior/Exterior
• Matching color with building or primer
• Custom capacity and fabrication
• Possibility of rigid construction without bracing

ERGONOMIC WORKSTATIONS

Gorbel Jig

Gorbel Zero Friction Roller-mounted Pivot and Carriage trussed for an easy displacement.

 

Gorbel Crane

Gorbel Zero Friction Trussed Beam and Runway track for an easy displacement.

 

Intelligent Lifting Device

 

• G-Force hoist with float mode
• Capacity from 165lbs to 1320lbs

 

ACCESSORIES

Hooks

 

Magnets

 

Load Display

 

Radio Control

 

Portable Stopper

 

Adjustable Forks Pallet Lifte

 

Crane lights

 

Lifting Tube

 

Equip yourself in PRO !